If you have not yet done so, download OBS software to your computer. You can get the download link here: https://obsproject.com/

After you have downloaded and opened the software, you will go to the settings menu in the bottom right hand corner of the screen.

In the Settings menu, you will go to the section on the left that says Stream. This is where you will put in your information from your Stream Monkey stream.

The URL needs to be the address from the stream you have set up on the Stream Monkey site. To find your stream details, you will click on Live Monitor, select your stream from the drop down at the top of the screen, and then scroll down to the tab called Encoder. If you click directly on the Primary address listed, it will copy it to the clipboard for you.

Paste the address into the address box. In the Stream box, you will need to paste the Stream Name.

Enter the following information in these fields.
URL: Primary Address
Stream Key: Your SM stream name. Please note that you will need to replace the word BITRATE with your projected bitrate. (example: Streamname_1_BITRATE@348362 might be changed to Streamname_1_2500@348362)
Check Use authentication.
Username and Password will be your stream's username and password, not your Stream Monkey login.

Next you will go to the Output stream.

You'll basically want to match the screen you see above, though you can adjust the bitrate if you need to. Higher bitrates will need more CPU and bandwidth for a clear stream. Pay special attention to the Keyframe interval, Profile, and encoder x264. You can also adjust the Audio Bitrate if you'd like, though it's default setting is just fine.

Once you're all done getting set up, hit Start Streaming. Pay special attention to the stats at the bottom of the screen to see how your stream is doing.

Here you can see if you are Dropping Frames, how long your Live Stream and Recording have been running, and your CPU usage and fps. This is important information to know, especially if you are having issues.

After your stream gets going, you can go to the place you have it embedded, or take a quick glance at the Preview window on your stream to make sure it's getting to where it needs to go. That's all there is to it!

Having problems getting set up, or have a quick question? Feel free to reach out to us for help!

Did this answer your question?